Güvenlik denetimi
kanca
1. The kanca used in the lifting mechanism driven by manpower is tested with 1.5 times the rated load as the inspection load.
2. The kanca used for the power-driven lifting mechanism shall be tested with 2 times the rated load as the inspection load.
3. sonra
kancamuayene yükünden kaldırıldığında, belirgin kusur veya deformasyon olmamalıdır ve açılma derecesindeki artış orijinal boyutun % 0,25'ini geçmemelidir.
4. İçinkancas that have passed the inspection, a mark should be printed in the low-stress area of the kanca, including the rated lifting weight, factory mark or factory name, inspection mark, production number, etc.
için hurda standartları
kancasNS
kancaaşağıdaki durumlardan biri meydana geldiğinde hurdaya çıkarılmalıdır:
â' Çatlak;
â'¡Tehlikeli kısım aşınması orijinal boyutunun %10'una ulaşır;
â'¢Açma derecesi, orijinal boyuta kıyasla %15 artırılmıştır;
④The torsion deformation of the kanca body exceeds 10°;
⑤The dangerous section of the kanca or the neck of the kanca is plastically deformed;
⑥The kanca thread is corroded;
⑦When the wear of the kanca bushing reaches 50% of the original size, the bushing should be replaced;
â'§ Parçanın mandreli ne zaman
kancaorijinal boyutunun %5'ine kadar aşınmışsa, mandrel değiştirilmelidir.